The electric oven adopts the new heating technology of energy saving and environmental protection. The electric heating pipe is heated by the power supply to generate heat source. When it is absorbed by the heating object, it can be directly transformed into heat energy, so as to obtain the rapid drying effect, shorten the production cycle, save energy and improve the product quality. The circulating fan installed on the upper part of the oven sends the cold air to the electric heating element installed in the electric heating chamber for heating as hot air, which is sent to the drying materials after air distribution by the air regulating plate. After exchanging with the materials, the waste gas carrying a large amount of moisture and waste heat is discharged into the external atmosphere (moisture discharge) through the moisture outlet, and the other part enters the circulating fan through the air inlet for recycling, so as to make full use of the waste heat
1. The external material is SECC steel plate, which is baked with powder paint after antirust, and the inside is sus stainless steel;
2. The operation procedure is simple and the temperature uniformity is good;
3. The vacuum degree of inner box can reach 1pA;
4. The suction valve and inlet valve are ball valves, which are easy to use and highly airtight;
5. Silica gel sealing, good sealing performance;
6. The circulation mode is thermal radiation and natural convection.
Number of compartments
It is used in general baking process, aging test of various electronic components, plastic and chemical products, high temperature stress relief requirements, development of industrial parts, quality management and other related normative fields.
U-shaped heating pipe
Hot air circulating fan
Load carrier (SUS304 material): can be set as required:2 layers, 3 layers, 4 layers, etc