300℃ Low Temperature Oven
The electric oven adopts the new heating technology of energy saving and environmental protection. The electric heating pipe is heated by the power supply to generate heat source. When it is absorbed by the heating object, it can be directly transformed into heat energy, so as to obtain the rapid drying effect, shorten the production cycle, save energy and improve the product quality. The circulating fan installed on the upper part of the oven sends the cold air to the electric heating element installed in the electric heating chamber for heating as hot air, which is sent to the drying materials after air distribution by the air regulating plate. After exchanging with the materials, the waste gas carrying a large amount of moisture and waste heat is discharged into the external atmosphere (moisture discharge) through the moisture outlet, and the other part enters the circulating fan through the air inlet for recycling, so as to make full use of the waste heat
  • Technical Features

    1. Material: SPCC steel plate is used on the outside and baked with powder paint after antirust treatment, and Sus stainless steel plate is used inside;

    2. Motor: high temperature resistant long shaft motor;

    3. Wind wheel: powerful multi wing wind wheel;

    4. Sealing: silica gel sealing;

    Over temperature protection system: 5;

    6. Circulation mode: forced horizontal air supply circulation, special air circuit design, uniform heating temperature;

    7. Temperature control mode: PID + SSR SCR;

    8. Temperature range: RT (room temperature) + 20 ℃ - 300 ℃;

  • TypeLoading methodWorking zoneExternal sizeQty of InterlayerPower(kw)Application
    HMF300-40/45/40single door400×450×400660×800×53022Laboratory
    HMF300-50/60/50single door500×600×500730×1230×63023Laboratory
    HMF300-60/90/60single door600×900×600870×1630×73045Industrial
    HMF300-80/100/80single door800×1000×8001070×1730×73046Industrial
    HMF300-100/100/60double door1000×1000×6001270×1820×77048Industrial
    HMF300-100/100/100double door1000×1000×10001270×1820×1170412Industrial
    HMF300-120/100/60double door1200×1000×6001470×1820×830410Industrial
    HMF300-140/120/60double door1400×1200×6001930×1970×830612Industrial
    HMF300-160/140/80double door1600×1400×8002110×2240×1030816Industrial
    HMF300-180/140/100double door1800×1400×10002360×2220×1170820Industrial
    HMF300-200/160/120double door2000×1600×12002500×2430×1430824Industrial
  • Application

    It is used in general baking process, aging test of various electronic components, plastic and chemical products, high temperature stress relief requirements, development of industrial parts, quality management and other related normative fields.

  • Main components
    U-shaped heating pipe


    Hot air circulating fan


    Load carrier (SUS304 material): can be set as required:

     2 layers, 3 layers, 4 layers, etc


Related Products